Operation Manual

66 User Manual
Once you have positioned the cursor at new location, press 'ENTER' (press 'CLEAR'
to abort operation):
Fig. 4.1.1.7b - Placing Waypoint between two existing ones (III)
4.1.1.8 Editing Waypoint
Select Advanced Mode + Place cursor on Waypoint
Press 'ENTER'. Select "EDIT" and press 'ENTER' to modify a Waypoint. A window
will be shown with Name, Symbol and Latitude/Longitude of the Waypoint, advising about
what Waypoint data are modifiable.
Fig. 4.1.1.8 - Edit Waypoint (I)
Use the cursor key to select the field. If you have selected Name field, press 'ENTER':
use the cursor key to insert the character (8 characters max), then press 'ENTER'. If Color
field is selected press 'ENTER': a window with 8 different colors appears, use the cursor
key to select the desired color and press 'ENTER'. If Symbol field is selected press 'ENTER':
a window with 16 different symbols appears: