Operation Manual

65
User Manual
Fig. 4.1.1.6a - Moving Waypoint function (II)
4.1.1.7 Inserting Waypoint
Every time you place the cursor on the segment connecting two existing Waypoints
of a route the following function is available.
Place cursor on route leg
Fig. 4.1.1.7 - Placing Waypoint between two existing ones (I)
Press 'ENTER'. Select "INSERT" and press 'ENTER'. The line between the two
Waypoints is turned into a dotted line: move the cursor to the new position. When the
cursor is stationary for one second or two, the line will "rubber-band", drawing a dotted line
between the last Waypoint and the cursor, and another dotted line between the cursor and
the next Waypoint:
Fig. 4.1.1.7a - Placing Waypoint between two existing ones (II)