Operation Manual

User Manual

Press 'ENTER'. Select "DELETE" and press 'ENTER'. The Waypoint is deleted

and a new line between previous and next Waypoint is shown. The deleted Waypoint remains

shaded until the screen is redrawn.

Fig. 4.1.1.3a - Deleting Waypoint (II)

4.1.1.4 Deleting route

Select Advanced Mode + Place cursor on Waypoint

Press 'ENTER'. Select "DELETE ROUTE" and press 'ENTER'. A window is

opened: select "YES" and press 'ENTER' to confirm (select "NO" and press 'ENTER'

otherwise). The route remains on the screen shaded until the screen is redrawn. To delete

route see also Par. 4.1.2.2 and 4.1.2.5.

4.1.1.5 Distance and Bearing to Target

Once you have positioned the cursor on the desired starting Waypoint (it could be

the first Waypoint of the route or another one) press 'GO-TO'. A circle surrounds the

Waypoint symbol. A line is shown, connecting the Target with the ship's position. When the

Target is placed, all navigation data are referred to this Target.

Fig. 4.1.1.5 - Selecting destination (Target)

The destination will automatically switch to the next Waypoint on the route when

you reach or pass the present destination.