Operation Manual

52 User Manual
Wrecks: Off/Icon/Icon+Depth (*). The default setting is Icon.
'MAP' for 1 second + "Other Map Configurations" + 'ENTER' +"Wrecks" + 'ENTER'
Note (*)
Choose the option:
• OFF : the object is not visible independently of the selected “Underwater Object Depth
Value”
• ICON : the object icon is visible without tags, in the range selected from “Underwater Object
Depth Value” option
• ICON+DEPTH : the object icon and tag is visible, in the range selected from “Underwater Object
Depth Value” option
3.5.2 GETTING AUTOMATIC INFO
The type of Automatic Info is user selectable.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "SETUP" + 'ENTER' +"AUTO
INFO" + 'ENTER'
The possible settings are:
• Off: disabled, no automatic info shown at all.
• On Points: only on points. This is the default setting.
• On All: on all objects (points, lines and areas).
The Automatic Info On Points shows information when the cursor is placed on
points (as Port Services, Tides, lights, wrecks, rocks, buoys, beacons, obstructions, land
markers, etc.). The Automatic Info On All shows information when the cursor is placed on
points, on lines (as Depth contours, Traffic Separation, Territorial Sea, Cartographic Lines
etc.) on areas (Depth, Built-up, Sea, Attention, Restricted etc.) and on names (on the beginning
of the text -hot spot- or on any of the characters of the name -name message box-). The
details on Land, Source of Data, Cartographic Area and Spot Soundings are not shown.
Fig. 3.5.2 - Automatic Info on Points window
If you press 'ENTER' all available information about the cartographic point under
the cursor will be shown.