Operation Manual

51
User Manual
Land Elevation Values: On/Off. The default setting is On.
'MAP' for 1 second + "Other Map Configurations" + 'ENTER' + "Land Elevation Values"
+ 'ENTER'
Roads: On/Off. The default setting is On.
'MAP' for 1 second + "Other Map Configurations" + 'ENTER' + "Roads" + 'ENTER'
Points Of Interest: On/Off. The default setting is On.
'MAP' for 1 second + "Other Map Configurations" + 'ENTER' + "Points Of Interest"
+ 'ENTER'
Lat/Lon Grid: On/Off. The default setting is On.
'MAP' for 1 second + "Other Map Configurations" + 'ENTER' + "Lat/Lon Grid" +
'ENTER'
Chart Boundaries: On/Off/Auto. The default setting is Auto.
'MAP' for 1 second + "Other Map Configurations" + 'ENTER' + "Chart Boundaries"
+ 'ENTER'
Value-Added Data: On/Off. The default setting is On.
'MAP' for 1 second + "Other Map Configurations" + 'ENTER' + "Value-Added Data"
+ 'ENTER'
Chart Lock: On/Off. The default setting is On.
'MAP' for 1 second + "Other Map Configurations" + 'ENTER' +"Chart Lock" + 'ENTER'
Underwater Objects Limit: Selects the max depth value to display Underwater Objects.
The default setting is 3Mt.
'MAP' for 1 second + "Other Map Configurations" + 'ENTER' +"Underwater Objects
Limit" + 'ENTER'
• If value is set to 0 Mt, the Underwater Objects are not shown on the charts. Menu
options are greyed out.
• If value is more than 0 Mt (i.e. 10 Mt), in the Range from 0 Mt to the selected value
the Underwater Objects are displayed according to their setting below.
Rocks: Off/Icon/Icon+Depth (*). The default setting is Icon.
'MAP' for 1 second + "Other Map Configurations" + 'ENTER' + "Rocks" + 'ENTER'
Obstructions: Off/Icon/Icon+Depth (*). The default setting is Icon.
'MAP' for 1 second + "Other Map Configurations" + 'ENTER' +"Obstructions" +
'ENTER'
Diffusers: Off/Icon/Icon+Depth (*). The default setting is Icon.
'MAP' for 1 second + "Other Map Configurations" + 'ENTER' +"Diffusers" + 'ENTER'