Operation Manual

49
User Manual
b. If the cartographic data is changed (for example the C-CARD is removed or replaced), Chart Language
settings should be verified and if necessary changed.
3.5.1.12 Other Map Configurations
'MAP' for 1 second + "Other Map Configurations" + 'ENTER'
This function allows the user to customize the following selections and is divided
into the following setting: Marine Settings, Depth Settings, Land Settings, Underwater Objects
Settings and Chart Settings.
Display Mode: To simplify the customization of the chart display, the map settings are
now re-organized in modes allowing the user to choose the preferred setting. Pre-
programmed settings are user selectable from Full, Medium, Low, Radar, Tides, Custom.
The default setting is Custom.
'MAP' for 1 second + "Other Map Configurations" + 'ENTER' + "Display Mode" +
'ENTER'
The table below shows the selections for each mode:
Setting Full Medium Low Radar Tides Custom
(Default values)
Names On On On On On On
Name Tags On Off Off Off Off On
Nav Aids & Light Sectors On No Sector No Sector No Sector Off On
Attention Areas On On Off Off Off On
Tides & Currents On Off Off Off On On
Seabed Type On Off Off Off Off On
Ports & Services On On Off On Off On
Tracks & Routes On Off Off Off Off On
Depth Range Min 0Mt 0Mt 0Mt 0Mt 0Mt 0Mt
Depth Range Max 9999Mt 9999Mt 9999Mt 9999Mt 9999Mt 5Mt
Land Elevations On On Off Off Off Off
Land Elevation Values On Off Off Off Off On
Roads On Off Off Off Off On
Points Of Interest On Off Off Off Off On
Lat/Lon Grid On Off Off Off Off On
Chart Boundaries On Auto Off Off Off Auto
Value-Added Data On Off Off Off Off On
Chart Lock On On On On On On
Und. Objects Limit 9999Mt 10Mt 10Mt 10Mt 10Mt 3Mt
Rocks Icon+Depth Icon Icon Icon Icon Icon
Obstructions Icon+Depth Icon Icon Icon Icon Icon
Diffusers Icon+Depth Icon Icon Icon Icon Icon
Wrecks Icon+Depth Icon Icon Icon Icon Icon
If Display Mode is Custom, it is possible to change the map settings as following:
Names: On/Off. The default setting is On.
'MAP' for 1 second + "Other Map Configurations" + 'ENTER' + "Names" + 'ENTER'