Operation Manual

47
User Manual
• ICON : the Safety Status Bar is not shown, but a warning alarm icon is
shown on the corner of the map screen as soon as any item
controlled by the DSI function returns an alarm condition. The
Warning Icon remains displayed until the alarm condition persists.
Placing the cursor over it, a quick help message is shown next to
the DSI icon, allowing to show the DSI bar. In this case - when the
DSI bar is opened via DSI alarm icon - it is allowed to obtain
information about each “active” DSI box (the red ones): it is
possible to select them by cursor movement left/right, and a list
of active alarms is shown underneath the selected box. By pressing
'CLEAR', the DSI bar is removed from the screen.
When Safety Status Bar is On, this feature displays a status bar with six boxes
showing the status of certain functions. Any warning or alarm condition is identified by the
red color to indicate possible risk.
Fig. 3.5.1.7 - Safety Status Bar
Boxes definition is as follows:
Zoom
• Normal: when the chart is displayed at normal scale.
• U. Zoom: red when the chart is under-zoomed out more than twice normal scale,
gray otherwise.
• O. Zoom: red when the chart is over-zoomed in more than twice normal scale, gray
otherwise.
• Chart Lock: red when the chart is zoomed in more than twice normal scale, gray
otherwise.
Best Scale
Red when a more detailed chart is available under the cursor position.
Data Off
Red when at least one of the following objects or layers is turned off (by the user):
Depths/soundings; Wrecks/obstructions; Tracks/routes; Attention areas; Nav-Aids.
Clear View
Displays when Clear View function is On.
Dangers
Red when “Guardian Technology” detects one of the following objects: Land,