Operation Manual

46 User Manual
NORMAL size
LARGE size
Fig. 3.5.1.5 - Example of Normal size (on the left side) and Large side (on the right side) settings
3.5.1.6 Dynamic Nav-Aids
'MAP' for 1 second + "Dynamic Nav-Aids" + 'ENTER'
This function allows settings blinking lights on Nav-Aids. The blink period and
color of each Nav-aid is read from the Nav-Aid attributes available on the data cartridge.
When the ship is inside the Nav-Aid nominal range, the light of the Nav-Aid will start
blinking. The default setting is Off.
When Dynamic Nav-Aids option is set to On, when the flashing light is Off, or
when fix position is out of the sector, the light color is displayed by using a faint light color.
3.5.1.7 Mixing Levels
'MAP' for 1 second + "Mixing Levels" + 'ENTER'
When the map coverage at the current zoom level does not fill the entire screen,
the chart plotter draws the rest of the map expanding the cartographic information read
from, at most, two zoom levels above the current zoom level. For this reason the map is
drawn three times: firstly it draws the two levels before the current level and then the current
level. The area covered by the cartographic data read from the previous levels is identified
by a dotted pattern. When the cursor is moved on an area not covered by data of the
current level the chart plotter zooms out to the first level covered by cartographic data. The
default setting is On.
Note
The Mixing Levels function works only with the new C-CARDs. It also affects the speed of the redraw of the
screen. If this function is not used it maybe disabled.
3.5.1.8 Safety Status Bar (DSI - Data Safety Indicator)
'MAP' for 1 second + "Safety Status Bar" + 'ENTER'
It is possible to choose between the three following options:
• ON : the Safety Status Bar is shown
• OFF : the Safety Status Bar is not shown