Operation Manual

42 User Manual
On the screen is shown a straight line connecting the Target (called DEST) with
the ship's position and an information window with Target position, that disappears when
the cursor is moved from the Target. When the Target is placed, all navigation data are
referred to this Target.
Note
When the chart plotter is turned Off, the Target does not remain in memory.
3.4.2 TIME TO GO
When the Target is set the TTG value is displayed in the Graphic Data page and in
the Navigation Data page:
'PAGE'
Note
If SOG value is less than 1.0 knots or the BRG is greater than 90 degrees, the TTG value is not displayed.
3.4.3 DELETING TARGET
Press cursor on Target icon, press 'CLEAR': the symbol identifies Target disappears
from the screen.
Otherwise (when the cursor is placed in a generic position on the chart) press
'GO-TO'. A window appears to advise that the Destination is present: select the item "STOP"
and press 'ENTER', the symbol identifies Target disappears from the screen.
Note
If you select the "START" item and press 'ENTER', the Target icon is moved on the new cursor position.
3.5 C-MAP B Y J EPPESEN MAX CARTOGRAPHY INFORMATION
MAX is a major evolution of the product technology. Key points are:
Data Features
• ISO Certification (electronic chart production process with quality certification)
• Extra Large Coverage (all the C-MAP B Y J EPPESEN electronic chart detail and a huge
coverage without having to change cartridge)
• Official data source (data based on use of official data sources)
• Detailed World Background (worldwide background chart with details)
• Depths & Land Elevation (color shading of sea depth and land altitude for improved chart
reading)