Operation Manual

40 User Manual
3.2.9.1 Navigation
Enables (On), disables (Off) or insert the time (2, 5, 10, 15 minutes) for the
Navigation Voice mode. If it is On, the message is always sent, as fast as possible. Instead if
it is one among the available values, for example 2 minutes, the message is sent related to the
selected time, in the previous example every 2 minutes.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "C- VOICE" + 'ENTER' + "NAVIGA-
TION" + 'ENTER'
3.2.9.2 Echosounder
Enables (On) or disables (Off) the Echosounder Voice mode. If it is On, the Depth
message is spoken. The message is spoken if a valid depth data is received by the chart
plotter or if it is in Simulation mode. The default setting is Off.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "C- VOICE" + 'ENTER' +
"ECHOSOUNDER" + 'ENTER'
3.2.9.3 Output Port
Selects the Output Port for the Voice function. The default setting is Port 1.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "C- VOICE" + 'ENTER' + "OUTPUT
PORT" + 'ENTER'
3.3 A-B-C-D FUNCTION
The A-B-C-D function allows you to create the A, B, C, D points and to delete
them.
3.3.1 INSERTING THE A-B-C-D POINTS
Place the cursor on the desired position and press 'ENTER' or 'A-B-C-D' (if it is
present): on the screen the A point and an information window on A appear. Move the
cursor and press 'ENTER' again or 'A-B-C-D' (if it is present): the B point appears, connected
to A with a straight segment; an information window on A-B segment (distance (DST),
bearing (BRG) and total distance from the first point) appears. Moving the cursor and
pressing 'ENTER' or 'A-B-C-D' (if it is present) places the C and D points: