Operation Manual
39
User Manual
Differential Correction Source
Allows setting what kind of Differential Correction will be used by the GPS between WAAS-
EGNOS and RTCM (beacon correction). The default setting is WAAS-EGNOS.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' + "GPS
SETUP" + 'ENTER' + "DIFF CORRECTION SOURCE" + 'ENTER'
Navigation Speed
Allows setting the Navigation Speed among Low Speed, Medium Speed and High Speed.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' + "GPS
SETUP" + 'ENTER' + "NAVIGATION SPEED" + 'ENTER'
3.2.8.5 Send & Receive Marks/Routes
Sets the desired port used for transferring User Points and Routes functions:
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +
"SEND/REC ROUTES & MARKS" + 'ENTER' + "Port1/Port2" + 'ENTER'
3.2.8.6 C-Link
Selects the Master unit (Primary Station) or the Slave unit (Secondary Station). See also
Par. 4.7: :
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +
"C-LINK" + 'ENTER' + "Secondary Station/Primary Station" + 'ENTER'
3.2.8.7 Cable Wiring Page
Shows a window containing the interface cable wiring. See Par. 6.3 and 6.4.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +
"CABLE WIRING" + 'ENTER'
3.2.8.8 Fish Finder Transmission F
OR
S
KY
X7 F
ISH
& C
OMPACT
X7 F
ISH
The Fish Finderinternal is connected directly to the Port 2. To switch the internal
Fish Finder transmission On/Off follow the procedure:
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +
"FISH FINDER + 'ENTER'
3.2.9 C-VOICE MENU
AVAILABLE IF THE CHART PLOTTER IS CONNECTED TO THE VOICE NAVIGATION SYSTEM
FOR MORE DETAILS SEE YOUR LOCAL DEALER
The chart plotter has two different vocal modes, Navigation and Echosounder.
According to what mode is selected the messages spoken from the chart plotter are different.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "C- VOICE" + 'ENTER'