Operation Manual

37
User Manual
3.2.6 UNITS SELECTION
Allows to select the preferred unit for Distance, Speed, Depth and Altitude (altitude
of GPS Antenna on the medium sea level).
Speed: Kts(knots)/Mph(miles per hour)/Kph(chilometres per hour). The default setting is
Kts.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "SPEED" + 'ENTER'
Distance: Nm(Nautical Miles)/Sm(statute miles)/Km(chilometres). The default setting is
Nm.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "DISTANCE" + 'ENTER'
Depth: Ft(Feet)/FM(Fathoms)/Mt(Meters). The default setting is Mt.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "DEPTH" + 'ENTER'
Altitude: Ft(Feet)/FL(Flight Level)/Mt(Meters). The default setting is Mt.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "ALTITUDE" + 'ENTER'
Temperature: °C/°F. The default setting is °C.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "TEMPERATURE" + 'ENTER'
3.2.7 NAV AIDS PRESENTATION
Allows to set the Nav Aids presentation as US or International. The default setting
is International. When selected it affects Lights, Signals, Buoys & Beacons display.
• International: Draws Nav-Aids using international symbology. All components of
Complex Objects are shown.
• US: Draw Nav-Aids using NOAA symbology. All components of Complex Objects
are shown.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "NAV AIDS PRESENTATION" +
'ENTER'
3.2.8 INPUT/OUTPUT MENU
WARNING !!!
After every software upgrade the RAM is cleared and the chart plotter re starts with the usual default settings. Please
go to the Input/output menu and set the proper input format once again.
3.2.8.1 Port 1/Port 2/Port 3 Input
Sets or disables the format for the navigation data input serial Port1/2/3. The
default setting is NMEA-0183 4800-N81-N. For example to set the Port 2 as NMEA-0183