Operation Manual

31
User Manual
3
For the New User
In order to get started using your chart plotter, you must do the following things:
1) Your chart plotter must have been installed properly according to the installation
instruction on Par. 6.2.
2) You must have performed the proper settings for use with your positioning
instrument (see Par. 2.5 and 2.6) and inserting the C-CARD for navigating in area you wish
(see Par. 2.7).
3) You must have Power On to the chart plotter and adjust the brightness and
contrast of the display (see Par. 2.2 and 2.3).
Once this is done, you can use your chart plotter for navigation.
3.1 SCREEN DISPLAY CONFIGURATION
Use '<PAGE>' to select the desired page, by showing the next or the previous page
as the relative key is pressed.
3.1.1 CHARTS AND TEXT AREA
The charts and text area can be shown in two different modes. The first is with text
area on the right side of the screen: