Operation Manual

18 User Manual
Power consumption
• 12W average; 27W max peak
Power supply
• 10 - 35 Volt dc
Operating Temperature Range
• From 0°C to 55°C (from 32°F to 131°F)
Memory
• Non volatile
Keyboard
• Backlighted, silicon rubber
FF Module 600W-50-200KHz Technical Specifications
• Power Output : 600W (4800Wpp), 50/200KHz Dual Frequency
• Max Depth : 213m (700Ft) at 200kHz, 457m(1500Ft) at 50kHz
• Automatic Recognition of the AIRMAR "X-DUCER ID" transducers for best
performance
• Advanced Digital Signal Processing
• Speed & Temperature Sensor (if available on transducer)
• Alarms (shallow water, depth, Fish, temp)
• Trip Log, Fish Symbols
• STC, Interference Rejection, Automatic noise reduction
• A-Scope, White Line, Zoom x2/x4
• Auto range/gain/frequency/shift/ping rate
1.3 BASICS
The chart plotter is controlled by using 13 keys. There is also a cursor key to move
a cursor across the screen. As you press a key, a single audio beep confirms the key action;
every time the key pressed is not valid, three rapid beeps sound indicates that no response is
available.