Operation Manual

126 User Manual
precise temperature measuring device, insert here a positive/negative offset to display right
value on FF screens.
6.5.11.6 Set Default Settings
Restores the default values.
6.5.12 ALARMS
The Alarms menu allows you to define additional sonar alarm settings for Fish
Alarm, Shallow Alarm, Depth Alarm and Temperature Upper/Lower/Rate.
'MENU' + "ALARMS" + 'ENTER'
6.5.12.1 Shallow Alarm
Triggers an alarm when depth becomes shallower than the value set.
6.5.12.2 Deep Water Alarm
Triggers an alarm when depth becomes deeper than the value set.
6.5.12.3 Temp Upper
Triggers an alarm when the transducer reports a temperature (from TEMP 1 sen-
sor) above the value set.
6.5.12.4 Temp Lower
Triggers an alarm when the transducer reports a temperature (from TEMP 1 sen-
sor) below the value set.
6.5.12.5 Temp Rate
Triggers an alarm when the transducer reports a temperature (from TEMP 1 sen-
sor) variation rate above the value set.
6.5.12.6 Fish Alarm
The options for Fish Alarm set the size of the fishes that, if detected by the unit,
switches an alarm to sound. These options are: Off, Small, Medium, Big and Huge. The
alarm sounds if the set size (or bigger) is detected.
6.5.13 LOAD SETTINGS FROM USER C-CARD
Load the complete settings from the User C-CARD and changes the active menu