Operation Manual

114 User Manual
6.1 SETTING THE INTERNAL FISH FINDER ON
The internal Fish Finder driver is connected directly to the dedicated serial Port2.
To switch the internal Fish Finder transmission On follow the procedure:
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +
"FISH FINDER" + 'ENTER' + "ON" + 'ENTER'
Note
It is not possible to connect any external Fish Finder unit to the chart plotter.
6.2 UNDERSTANDING THE FISH FINDER PAGE
The display on chart plotters shows a history of time of the echoes received by the
transducer. The chart plotters have a menu that allows adjustments to receiver sensitivity,
depth range and scrolling speed of the Fish Finder display.
Color Bar
5
3
Echogram window
Depth ruler
2
Variable Depth Marker (VDM)
Zoom Bar
8
9
7
4
Digital Depth
Water temperature
Warning message
1
7
1
5
3
6
8
9
A-Scope
10
6
2
6
Alarm Bar
11
4
10
Operating Frequency
11
Fig. 6.2 - The Fish Finder page
The following is a short description of terms listed in the previous Fig. 6.2:
Warning Message
Flashing label "Simulation" when the echo sounder is in Simulation mode.
Echogram window
Graphic presentation of sonar soundings recorded as a continuous profile scrolling
across the screen from right to left. Such recordings represent the image of the water
beneath your boat, items appear as they pass under your transducer; the items on the