Operation Manual

110 User Manual
Otherwise if the received PTX is the active one (the PTX on which we are navigating
to), navigation data are updated in memory, the new PTX coordinates becomes the
Destination position and the current Fix position becomes the starting position. The map is
not automatically centered on it.
The PTX icon appears at the new position and a pop-up warning window appears.
It is possible to close all menus/data pages (if open) and center the chart on the received
PTX (see Par. 5.11.4.4). Otherwise you could close the alarm window and stay on the active
screen.
5.11.4 MOVING CURSOR ON THE PTX ICON
Placing the cursor on the PTX icon shown on the screen, an information window
containing the PTX Identifier, position and status (Overboard or Recovered) appears:
MOBILARM - PTX
OVERBOARD
41°13.334N
009°30.702E
Id Time
000001A0
10:16:79 PM
Fig. 5.11.4 - Example of PTX information window
5.11.4.1 Deleting PTX
The Delete PTX function permanently removes the selected PTX from the chart
plotter memory and from the chart display.
Move the cursor over the PTX to delete. Press 'ENTER', using the cursor select
"DELETE" and press 'ENTER'. A warning pop-up window will be shown. Select "YES"
and press 'ENTER'.
5.11.4.2 Goto PTX
The Goto PTX function activates the navigation to the selected PTX.
Place the cursor on PTX cursor. Press 'ENTER', using the cursor select "GOTO"
and press 'ENTER'.
If the navigation is set to the selected PTX, to terminate the navigation press
'ENTER', using the cursor select "STOP GOTO" and press 'ENTER'.