Operation Manual

96
User Manual
5.2.6 SPEED FILTER
Turns On/Off the Speed Filter. When it is On, you can filter the speed of
the ship, to optimize it. The default setting is Off.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "FIX" + 'ENTER' + "SPEED
FILTER" + 'ENTER'
5.2.7 FILTER DUMP
Inserts the value for the Filter in the range [500 - 12000]. The default setting
is 500.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "FIX" + 'ENTER' + "FILTER
DUMP" + 'ENTER'
5.2.8 DEAD RECKONING
Enables (On) or disables (Off0 the Dead Reckoning. The default setting is Off.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "FIX" + 'ENTER' + "DEAD
RECKONING" + 'ENTER'
5.3 NAVIGATE
The Navigate menu allows to handle functions related to navigation.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "NAVIGATE" + 'ENTER'
5.3.1 COORDINATE SYSTEM
Sets your preferred Coordinate System among ddd mm ss, ddd mm.mm,
ddd mm.mmm, UTM, OSGB, TD. The default setting is ddd mm.mmm.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "NAVIGATE" + 'ENTER' +
"COORDINATE SYSTEM" + 'ENTER'
If TD has been selected a new menu is shown on the screen:
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "NAVIGATE" + 'ENTER' +
"COORDINATE SYSTEM" + 'ENTER' + "TD" + 'ENTER'
Chain: Selects the preferred chain. The default setting is 9970.
Pair: Selects the pair of stations in the selected chain. The default setting is W X.
ASF 1/2: Sets the ASF (Additional Second Factor) for the slave in the selected chain.
The default setting is 0.
Alter: Turns On/Off the Alternate Solution in the chain. The default setting is Off.