Operation Manual

67
User Manual
4.1.1.6 Moving Waypoint
Select Advanced Mode + Place cursor on Waypoint
Press 'ENTER'. Select "MOVE" and press 'ENTER'. Use the cursor key to
move the cursor: a dotted line, connecting the Waypoint to the new position, is shown:
Fig. 4.1.1.6 - Moving Waypoint function (I)
To place the Waypoint in the new position, choose the new place and press
'ENTER' ('CLEAR' otherwise), Waypoint appears in the new position:
Fig. 4.1.1.6a - Moving Waypoint function (II)
4.1.1.7 Inserting Waypoint
Every time you place the cursor on the segment connecting two existing
Waypoints of a route the following function is available.
Place cursor on route leg