Operation Manual

User Manual

screen, if you release the key before the countdown timer reaches zero, the chart

plotter will remain On.

2.3 CHANGING BACKLIGHT AND CONTRAST

Press and immediately release 'POWER' (do not press and hold the key, or

the "power-off" message will be displayed!), a pop-up window appears to adjust the

backlight and the contrast of the display.

WARNING !!!

At very low temperatures the CCFL backlight may not glow properly. Allow a few minutes for

it to warm up.

2.4 SELECTING THE USER INTERFACE LANGUAGE

It is possible to set the language to display menus, data pages, warning/alarm

messages, full/quick info, list of objects found by find/nearest function, and on charts

(such as place's names, buoy's names and so on). The default setting is Italian.

To select the language you want:

'MENU' + "BASIC SETTINGS" + 'ENTER' + "LANGUAGE" + 'ENTER'

Choose the language you prefer and press 'ENTER' to confirm.

Note

If the selected language is not available on cartographic data, English language is used instead.

WARNING !!!

If you have accidentally selected an incomprehensible language, and you don't be able to reselect

your language (the above procedure is not of help to you), follow this procedure: press 'MENU',

move the cursor to highlight the third selection (starting from the top) which corresponds to the

Basic Settings menu and press 'ENTER'. Then a window appears with "Language" message, press

'ENTER'; now select your language and press 'ENTER' again. Anyway if you in trouble, see

Chapter "System Test" for a RAM Clear operation: the chart plotter will also return all selections,

in particular language, to original default values.

2.5 EXTERNAL CONNECTIONS

2.5.1 GPS CONNECTION F

X5 & S

X5 F

ISH

Connect the GPS to the Port 3: see the picture in Fig. 2.5.1 and Fig. 2.5.1a.