Operation Manual

80
User Manual
4.4.3 DISPLAYING TRACK
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' +
"VISIBILE" + 'ENTER'
To enable (On) or disable (Off) the displaying of track. The default setting is On.
4.4.4 SELECTING TRACK COLOR
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' +
"COLOR" + 'ENTER'
Select the desired color among the 8 colors available for the selected track.
4.4.5 DELETING TRACK
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' +
"DELETE" + 'ENTER'
Deletes the all track storing. After pressing 'ENTER' a warning window
appears: select "Yes" and press 'ENTER' to confirm (select "No" otherwise).
4.4.6 DELETING SELECTED TRACK
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' +
"DELETE SELECTION" + 'ENTER'
Deletes the track selected. After pressing 'ENTER' a window appears: press
'ENTER' to set the first point , then press 'ENTER' to set the second point. A
warning window appears: select "Yes" and press 'ENTER' to confirm the deletion
(select "No" otherwise).
4.4.7 SELECTING TRACK MEMORIZING TYPE
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' + "STEP
UNIT" + 'ENTER'
Choose Distance (Dist) - the chart plotter can store a fix when the distance
from its last stored position is greater than a defined distance; Time - the chart plotter
can store a fix after a defined time; Auto - the software decides when storing a posi-
tion, on the basis of the straight or curved track. The default setting is Time.
4.4.8 SELECTING DISTANCE
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' +
"DISTANCE" + 'ENTER'
When the tracking function is On and the type of track storing is Distance,
you can store a fix when the distance from its last stored position is greater than a
defined distance. Choose in the range 0.01, 0.05, 0.1, 0.5, 1.0, 2.0, 5.0, 10.0 Nm (the
distance unit is selected by the user, see Cap. 5). The default setting is 0.01 Nm.