Operation Manual

44
User Manual
3.4 NAVIGATING TO A SINGLE DESTINATION
3.4.1 DISTANCE AND BEARING TO TARGET (DESTINATION)
Once you have positioned the cursor on your desired location (a generic
point on the map) press 'GO-TO'. On the screen is shown a straight line connecting
the Target (called DEST) with the ship's position and an information window with
Target position, that disappears when the cursor is moved from the Target. When
the Target is placed, all navigation data are referred to this Target.
Note
When the chart plotter is turned Off, the Target does not remain in memory.
Fig. 3.4.1 - Navigation to a single destination
3.4.2 TIME TO GO
When the Target is set the TTG value is displayed in the Graphic Data Page:
'PAGE' more times to select the Graphic Data page
Note
If SOG value is less than 1.0 knots or the BRG is greater than 90 degrees, the TTG value is not
displayed.
3.4.3 DELETING TARGET
Press cursor on Target icon, press 'CLEAR': the symbol identifies Target
disappears from the screen.
Otherwise (when the cursor is placed in a generic position on the chart)
press 'GO-TO'. A window appears to advise that the Destination is present: select
the item "STOP" and press 'ENTER', the symbol identifies Target disappears from
the screen.
Note
If you select the "START" item and press 'ENTER', the Target icon is moved on the new cursor
position.