Operation Manual

128
User Manual
6.5.12.5 Temp Rate
Triggers an alarm when the transducer reports a temperature (from TEMP 1
sensor) variation rate above the value set.
6.5.12.6 Fish Alarm
The options for Fish Alarm set the size of the fishes that, if detected by the
unit, switches an alarm to sound. These options are: Off, Small, Medium, Big and
Huge. The alarm sounds if the set size (or bigger) is detected.
6.5.13 LOAD SETTINGS FROM USER C-CARD
Load the complete settings from the User C-CARD and changes the active
menu settings. Insert the User C-CARD into the slot, then follow the procedure:
'MENU' + "LOAD SETTINGS FROM USER C-CARD" + 'ENTER'
6.5.14 SAVE SETTINGS TO USER C-CARD
This is useful to avoid the user having to retune up Fish Finder after a Clear
RAM operation or a software update.
6.5.15 RESTORE CURRENT PRESET DEFAULTS
This option restores the default values only for the current presets and does
not affect the other presets.
6.6 TRANSDUCERS
The transducer is a device that transmits and receives sound waves into the
water. The active component inside the transducer is commonly referred to as an
element but actually is a piezoelectric ceramic material.
Note
In the following tables, related to the transducer functions in the "Funct." column, these
abbreviations are used: D = Depth, S = Speed and T = Temperature.