Operation Manual

107
User Manual
Delete All
'MENU' + "DSC" + 'ENTER' + "DIRECTORY" + 'ENTER' + "DELETE ALL" +
'ENTER'
Deletes all entries in the page.
5.10.3 QUICK INFO ON DSC ICONS
Placing the cursor on the Distress Call or Position Request icon, the following
information is displayed:
• Vessel Name/MMSI Number
• Position
• Date and Time
• Distance and Bearing from current vessel's position
Pressing 'ENTER' it is possible, by selecting "DELETE" deletes the DSC
icon from the DSC Log page, otherwise by selecting "DSC LOG" the DSC Log page
is shown.
5.11 MOBILARM SYSTEM
The MOBILARM is an automated crew monitoring system dedicated to
monitoring onboard crew by maintaining a constant link between the crew member
and the boat. The instant a man over-board event happens, an automatic alarm is
sounded, and the vessels position is logged.
Connect the MOBILARM System to a serial port of the chart plotter.
5.11.1 SOFTWARE SETUP
After connections have been made, the chart plotter has to be setup to be
able to receive NMEA information from the MOBILARM. When a MOBILARM is
connected to the chart plotter, any input port of the NMEA Input/Output menu
must be changed to MOBILARM as shown below for communications.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +
select any input port you want + 'ENTER' + "MOBILARM" + 'ENTER'
The chart plotter continuously verifies the communication status with
MOBILARM instruments. If there is no communication for more than one minute,
an alarm window appears.