User's Manual

6
controls was therefore reduced and a calibration of
the detector to our factory settings was also made
to guarantee best results in the eld. The LORENZ
DEEPMAX Z2 was developed for professional search
and locating applications.
A variety of search coils can be connected to this
metal detector. Large areas can be detected eecti-
vely especially with frame coils. Saltwater, most types
of ground or temperature changes will only slightly
aect the detection range of the DEEPMAX Z2.
Highly sensitive to all kinds of metal
Stable operation on mineralized ground or salt
water with Pulse Ground Balancing System
Reliable / simple operation with few controls and
customized LC Display
Exact pinpointing with large coils
Very easy and eective detection of large areas
Rugged, rened mechanical construction with
water and dust protected electronics unit
A variety of search coils are available for dierent
detection purposes
Automatic adaptation of dierent coil sizes and
coil designs to the electronics
Small unwanted metal objects can either be
identied or eliminated
Fast audio response speed with dierent settings
Logarithmic audio response and intensity bar
graph reading for easy pinpointing
Battery check with audio alarm tone
Calibrated static (non-motion) metal classica-
tion with visual conductivity/ time delay reading
Improved ferrous/ non-ferrous identication
Precisely adjustable audio-threshold
Stable static response (acoustical and visual)
Waterproof search coils
Rechargeable low self discharge NiMH batteries
for worldwide operation
Additional Battery + GPS module (Power Bank)
can be connected to double the battery capacity
Fast charge electronics for worldwide operation
100-240V AC/50-60Hz
Car charger for 10-30V DC supplies available
Frequency and Filter function for low frequency
EMI interference reduction
New dierential inputs with new coil designs
for interference elimination
Automatic and manual ground calibration
retuning facility
Dierent Delay and Sensitivity settings to elimi-
nate small objects or for easy pinpointing
Extreme detection depths for very large metal
objects
Specialized on gold and improved detection
range on small, low conducting metal pieces
Low frequency interference elimination circuitry
for less low frequency interference
Enlarged dynamic range for extreme ground
signals and easy pinpointing
Single or dual, induction balanced or dierential
coil designs can be connected
Easy to use multi channel data logger function
works with additional Hard- and Software to gene-
rate six 2D image and six 3D surface maps from the
scans being taken. Each map is dierent depending
on the electronic analysis method and therefore
can be the key to the probable kind of metal buried
in the ground
GPS based meter and compass heading informa-
tion, makes it easy to work with the data logger
Signal strength bar graph, time delay reading,
ferrous/ non-ferrous icons, battery condition and all
the mode settings are displayed simultaneously on
a large LC Display