User's Manual
12
5. CONNECTORS / LOUDSPEAKER
COIL JACK
Search coils of dierent size and shape can be con-
nected to this jack. The search coils available for the
LORENZ DEEPMAX Z2 have got coded connectors
to adapt the electronics to the coil automatically.
To connect a coil plug to the electronics make sure
that it is fully pushed in the jack and that the sleeve
is fastened by rotating it clockwise. Note: Some coils
and adapters have been changed and improved
therefore refer to newest Z2 coils only!
HEADPHONES/ CHARGER/ EXTERNAL
BATTERY + GPS MODULE / USB DATA
TRANSFER JACK
The stereo headphones can be connected with the
supplied adapter cable to this jack. Any stereo head-
phones ranging from 8 to 100 Ohms can be connec-
ted. The built- in loudspeaker will be automatically
turned o when headphones are connected.
The built in NiMH battery can be recharged with the
supplied charger when connected to the same jack.
An optional external power supply Battery + GPS
module (Power Bank) will double the battery
capacity when being connected to this jack. At the
same time the GPS will support the Z2 built- in data
logger.
After collecting eld data the same can be trans-
ferred via the same connection to the computer
via an optional USB data transfer cable using the
same jack. It is also possible to update the rmware
of the Z2 by means of the same data transfer cable
connected to a computer and this jack.
Any connectors should be disconnected when the
Z2 is not in use or when planning to store the unit in
order to avoid a slow discharge of the batteries.
LOUDSPEAKER
The LORENZ DEEPMAX Z2 has got a built-in loud-
speaker which gives an audible signal when the
search coil approaches to a metal object. The audio
frequency and volume intensity will change with
the distance between the search coil and metal
for better pinpointing. Especially with two persons
operation and large diameter coils the signal from
the loudspeaker is of great help for both persons.