Operation Manual

8
F14-a F14-b F14-c F14-d
Installation for group II / III
This installation method is for a child within Group
II(15-25kg)and Group III(22-36kg).
Note: the car seat must be used Isofix anchors
plus top tether at the same time with 3-point
automatic seat belt for group II/III all the time.
a) Remove the harness system, including the belt
pads, central buckle and crotch strap.
b) Adjust the headrest by pulling the lifting handle at
your required position according to your child’s
height.
c) Place your child into the car seat.
d) Thread the vehicle's shoulder belt from the Group
II belt guide slot (F14-a), or GroupIIIbelt guide slot
(F14-b),and thread the lap belt into the belt guide
hole (F14-c).So the installation is completed
(F14-d).
e) Joint the belts and buckle up.
F14