Installation & Assembly

Repeat 4 x
Install Dowels in
this two other holes
Insert 14 each Klix Cam (B) in
hole positions as provided.
Use Cam Cover (H) to cover
Klix Cam (B)
Install 4 each screws (F)
in each L-Bracket (E)
Install Wood Dowel in center hole
position on work surface as provided
Insert 8 each Cam Locks in top work
surface, in hole positions as provided
Repeat 4 x
Assembly Instructions
Bow Front Desk Shell
COMPLETED ASSEMBLY
IMPORTANT NOTE:
• Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
• Check to make sure that you have all parts and hardware.
• Remove all wrapping materials, including staples and packaging straps before your start to assemble.
• Do not tighten all screws/bolts until pieces are completely assembled.
• Keep all hardware parts out of children’s reach.
• It is recommended for 2 persons to complete this assembly.
Repeat 4 times in each
of the leg panel inserts
Cam Cover
Cam Lock
14Pcs + 2 extra Pcs
Klix Cam
14Pcs + 2 extra Pcs
Dowel
9Pcs + 2 extra Pcs
Screw #4 x 5/8"
30Pcs + 2 extra Pcs 14Pcs + 2 extra Pcs
STEP 3
STEP 1
STEP 2
IMPORTANT:
If attached pedestal(s) LLR69398/69432/69987,
remove L brackets from leg panel.
69370/69406/69952/69591/18260