Installation Guide

Cold
Hot
Connect and tighten the supply hoses.
4
Turn on the water supplies.Check all connections for leaks
.
1 Insert the faucet.
3
2 Tighten the mounting nuts.
The side with stick out
face up to the faucet.
Installation of Faucet
1 Unscrew components A & B. to the seal.
A
B
2 Silde the drain body(C) through the hole
in the sink.
3 Screw components A & B back on as shown.
4 Connect the rear end of the drain to the Drain Pipe.
5 Push to activate.
ยท Please avoid using plumber's putt The seal on top is leak-free. Plumber's putty might cause damage.