Installation Guide

Cold

Hot

Installation Guide

4 Connect and tighten the supply hoses.

Turn on the water supplies.Check all connections for leaks.

1 Insert the faucet.

2 Tighten the mounting nuts.

The side with stick out

face up to the faucet.

Please contact

lordearproducts@gmail.com rst ,

If you have any questions or need help.

Package Includes

Bathroom Sink Faucet x 1

Pop-up Drain Assembly x 1

Hot & Cold Water Supply Hoses

PAGE 1
Installation Guide Package Includes Bathroom Sink Faucet x 1 Pop-up Drain Assembly x 1 Hot & Cold Water Supply Hoses Please contact lordearproducts@gmail.com first , If you have any questions or need help. 2 Tighten the mounting nuts. 1 Insert the faucet. The side with stick out face up to the faucet. 3 Connect and tighten the supply hoses. Hot 4 Turn on the water supplies.Check all connections for leaks.
PAGE 2
Installation Guide Please contact lordearproducts@gmail.com first , If you have any questions or need help. 1 Unscrew components A & B. to the seal. 2 Silde the drain body(C) through the hole in the sink. 3 Screw components A & B back on as shown. A B 4 Connect the rear end of the drain to the Drain Pipe. 5 Push to activate. · Please avoid using plumber's putt The seal on top is leak-free. Plumber's putty might cause damage.