User's Manual

11
1.5.4I/OInt erface

Fields Description
Main
ItmainlyusedasPoweroverEthernet(PoE)port,whichallowstherouterpowered
upbyPoEadapterwhentheconnectionisestablishedbyRJ‐45Cat.5cable.It
supportsauto‐sensingon10/100Mspeed,half/fullduplex,andcomplieswithIEEE
802.3/802.3urespectively.
Secondary
TheSecondaryEthernetportallowsuserstoconnecttoanotherdevicethroughRJ‐
45Cat.5cable.Itsupportsauto‐sensingon10/100Mspeed,half/fullduplex,and
complieswithIEEE802.3/802.3urespectively.
(Note:InOperationmodetheAProuter’ssecondaryportwillbeWANPortby
default).
ResetButton
Presscontinuallytheresetbuttonatleast5secondstoresettheconfiguration
parameterstofactorydefaults
EarthGround
Itusedtoconnectthemetallinetogroundinordertoavoidthedevicefrom
externalelectricaldamage.

Note.LP‐2596KbuiltinPoEpassthroughfunctiononSecondaryEthernetport.Itmeansthe
SecondaryEthernetportisabletoprovide24Vpowerforasecondarydeviceifthisfunction
enabledonWebConfiguration(Pleaseref ertothestatementonAdvancedSettingofRadio
menu).