User's Manual

11
1.5.4 I/O Interface
Item
Description
Main
It mainly used as Power over Ethernet (PoE) port, which allows
the router powered up by PoE adapter when the connection is
established by RJ-45 Cat.5 cable. It supports auto-sensing on
10/100M speed, half/ full duplex, and complies with IEEE 802.3/
802.3u respectively.
Secondary
The Secondary Ethernet port allows users to connect to another
device through RJ-45 Cat.5 cable. It supports auto-sensing on
10/100M speed, half/ full duplex, and complies with IEEE 802.3/
802.3u respectively.
Reset Button
Press continually the reset button atleast 5 seconds to reset the
configuration parameters to factory defaults
Earth Ground
It used to connect the metal line to ground in order to avoid the
device from external electrical damage.
Note. LP-2596K built in PoE pass through function on Secondary Ethernet port. It means the
Secondary Ethernet port is able to provide 24V power for a secondary device if this function
enabled on Web Configuration (Please refer to the statement on Advanced Setting of Radio
menu).