User's Manual

8
PLUG AND PLAY SETUP GUIDE
Connect your Pro Access Point to your Router
a.
OpenthelidoftheAccessPointandcheckthatthePoEcableissecurelyfastenedtotheMain port
b.  LocatethePoEAdapterandconnectthe30ftPoEcabletothePOE port onthePoEadapter
c. LocatethepoweradapterandconnectoneendtoapoweroutletandtheotherendtotheDC port onthePoEadapter. 
d. Locatetheshorternetworkcableandconnectoneendtothe LAN port onthePoEadapterandtheothertoyourrouter’s
network(LAN)port,oranetworkswitch.
Note: Use only Ethernet cables that do NOT support PoE for this connection. 
e. Allowupto2minutesfortheProAccessPointtoconfigureitselftoyournetwork.(DHCPNetworksOnly)
Connect your PC to the Pro Access Point
Connecting Wirelessly:
WithyourPCorMac,scanforavailablewirelessnetworksandlocatethewirelessnetworkfortheProAccessPoint:
BydefaulttheProAccessPointwillhaveaSSIDwiththename:Loopcomm_AP. ThedefaultWPAsecuritykeyis:
loopcommwifi.
Wired Connections: