User's Manual
Table Of Contents
- FCC
- Terminology
- Introduction
- Installation
- Software configuration
- Prepare your PC to configure the WLAN Broadband Router
- Connect to the WLAN Broadband Router
- Management and configuration on the WLAN Broadband Router
- Status
- Setup Wizard
- Operation Mode
- Wireless - Basic Settings
- Wireless - Advanced Settings
- Wireless - Security Setup
- Wireless - Access Control
- WDS Settings
- Site Survey
- WPS
- LAN Interface Setup
- WAN Interface Setup
- Firewall - Port Filtering
- Firewall - IP Filtering
- Firewall - MAC Filtering
- Firewall - Port Forwarding
- Firewall - URL Filtering
- Firewall - DMZ
- Management - Statistics
- Management - DDNS
- Management - Time Zone Setting
- Management - Denial-of-Service
- Management - Log
- Management - Upgrade Firmware
- Management - Save/ Reload Settings
- Management - Password Setup
- FREQUENTLY ASKED QUESTIONS (FAQ)
- What and how to find my PC’s IP and MAC address?
- What is Wireless LAN?
- What are ISM bands?
- How does wireless networking work?
- What is BSSID?
- What is ESSID?
- What are potential factors that may causes interference?
- What are the Open System and Shared Key authentications?
- What is WEP?
- What is Fragment Threshold?
- What is RTS (Request To Send) Threshold?
- What is Beacon Interval?
- What is Preamble Type?
- What is SSID Broadcast?
- What is Wi-Fi Protected Access (WPA)?
- What is WPA2?
- What is 802.1x Authentication?
- What is Temporal Key Integrity Protocol (TKIP)?
- What is Advanced Encryption Standard (AES)?
- What is Inter-Access Point Protocol (IAPP)?
- What is Wireless Distribution System (WDS)?
- What is Universal Plug and Play (uPNP)?
- What is Maximum Transmission Unit (MTU) Size?
- What is Clone MAC Address?
- What is DDNS?
- What is NTP Client?
- What is VPN?
- What is IPSEC?
- What is WLAN Block Relay Between Clients?
- What is WMM?
- What is WLAN ACK TIMEOUT?
- What is Modulation Coding Scheme (MCS)?
- What is Frame Aggregation?
- What is Guard Intervals (GI)?
- Configuration examples
Software configuration
-41-
directly to secure the data transmission
among the connection. User can use
embedded PPTP client supported by this
router to make a VPN connection.
Enable Dynamic Mode
Click to select PPTP Dynamic support on
WAN interface for IP address assigned
automatically from a PPTP server.
IP Address
If you select the PPTP support on WAN
interface, fill in the IP address for it.
Subnet Mask
If you select the PPTP support on WAN
interface, fill in the subnet mask for it.
Gateway
If you select the Static PPTP support on WAN
interface, fill in the gateway for WAN interface
out going data packets.
Server IP Address
Enter the IP address of the PPTP Server.
Server Domain Name
Assign Domain Name and dispatch to PPTP
servers. It is optional field.
User Name
If you select the PPTP support on WAN
interface, fill in the user name and password
to login the PPTP server.
Password
If you select the PPTP support on WAN
interface, fill in the user name and password
to login the PPTP server.
MTU Size
Fill in the mtu size of MTU Size. The default
value is 1400.
Request MPPE Encryption
Click the checkbox to enable request MPPE
encryption.
Attain DNS Automatically
Click to select getting DNS address for
PPTP support.
Please select Set DNS Manually if the
PPTP support is selected.
Set DNS Manually
Click to select getting DNS address for
PPTP support.
DNS 1
Fill in the IP address of Domain Name Server
1.
DNS 2
Fill in the IP address of Domain Name Server
2.
DNS 3
Fill in the IP address of Domain Name Server
3.
Clone MAC Address
Fill in the MAC address that is the MAC
address to be cloned.
Enable uPNP
Click the checkbox to enable uPNP function.
Enable IGMP Proxy
Click the checkbox to enable IGMP Proxy.