User's Manual

58/61
TTLS:
1. Select TTLS from the Authentication type drop-down list. Key-in the identity as
"wpatest2". Select CHAP for tunnel authentication, and key-in the identity as
"wpatest2" and tunnel password as "test2". These settings are the same as our
intended AP's setting.
2. Click "OK". The dialog box should appear as the image below.
*If you want to disconnect, please click "Cancel" on the Authentication Status function page.
*In Profile function, show "Profile Name" option only in adding AP to Profile function.
3. If the connection is successful, the dialog box will appear as the image below.