User's Manual

38/61
2.7.2 Example to Add to Registrar Using PIN Method
The user obtains a device password (PIN Code) from the STA and enters the
password into the Registrar. Both the Enrollee and the Registrar use PIN Config
method for the configuration setup. The following image outlines the process.
 Select an AP (SSID/BSSID) that STA will join to and Select the “PIN/numeric
code” method.
 Select "Enrollee" from the Config Mode drop-down list.
 Enter the PIN Code of the STA into the Registrar when prompted by the Registrar.