User's Manual

37/61
Figure 2-7-1-1 WPS Profile
 PIN Code: The user is required to enter an 8-digit PIN Code into Registrar. When
an STA is the Enrollee, you can click "Renew" to re-generate a new PIN Code.
 Config Mode: The station serving as an Enrollee or an external Registrar.
Figure 2-7-1-2 WPS PIN function
After the user clicks PIN or PBC, please do not rescan within two-minutes of the
connection. If you want to abort this setup within the interval, restart PIN/PBC or
click "Disconnect" to stop WPS action.
 Progress Bar: Displays the rate of progress from Start to Connected.
 Status Bar: Displays the current WPS Status.
**There are examples in section 2-7-3(PIN Enrollee Setup), section 2-7-4(PBC
Enrollee Setup) and section 2-7-5(Registrar Configures and AP)**