User's Manual

25/61
 802.1x Setting: This is introduced in the topic of “Section 3-2 : 802.1x Setting”
Figure 2-2-7 Advanced Configuration
 Power Save Mode: Choose CAM (Constantly Awake Mode) or Power Saving
Mode.
 Channel: Only available for setting under Ad-hoc mode. Users can choose the
channel frequency to start their Ad-Hoc network.
 RTS Threshold: User can adjust the RTS threshold number by sliding the bar, or
key in the value directly. The default value is 2347.
 Fragment Threshold: User can adjust the Fragment threshold number by sliding the
bar or key in the value directly. The default value is 2346.
2.2.3 Example to Add Profile in Profile
 Click "Add" below the Profile List.
 The "Add Profile" will appear.