User's Manual

10/61
Figure 1-13 Show connection status by using WZC to initiate the connection
1.2 Windows AutoConfig Service for Vista
1.2.1 Ralink Wireless Utility and Windows AutoConfig Service
In Windows Vista, the Auto Config service provides basic wireless configuration
functions for the Ralink Wireless Network Interface Controller. In order to perform
these functions, the Auto Config service should first be enabled (Refer to Section
1-2-2).
Once the Ralink wireless utility is minimized, click the Ralink icon as shown in
Figure 1-1. This will bring up the option menu shown as Figure 1-2 for the user to
restore the utility window or terminate the utility.
Figure 1-1
Figure 1-2
The Ralink wireless utility as shown in Figure 1-3, provides profile management, the
available networks listing, a statistical counter display, Wi-Fi multimedia (WMM),
protected Wi-Fi setup, Cisco compatible extensions (CCX), call admission control
(CAC), radio controls, Ralink driver/utility information, and help functions.