User Manual
3
1. Introduction
1.1 Welcome
PCI Adapter connects you with IEEE802.11n networks at receiving rate up to an incredible 300Mbps!
By using the reflection signal, 802.11n technology increases the range and reduces "dead spots” in the
wireless coverage area.
Unlike ordinary wireless networking of 802.11b/g standards that are confused by wireless reflections,
802.11n can actually use these reflections to increase four times transmission range of 802.11g
products.
Besides, when both ends of the wireless link are 802.11n products, The PCI can utilize twice radio
band to increase three times transmission speed of ordinary 802.11g standard products, and can comply
with backwards 802.11b/802.11g standards.
Soft AP supported by PCI Adapter can help you establish wireless LAN networking with lowest cost.
Besides, WPS (PBC and PIN) encryption method can free you from remembering the long passwords.
Complete WMM function makes your voice and video more smooth.
1.2 Contents of Package
One PCI Card
One Installation CD
Detachable 2 dBi antenna
Contact your local authorized reseller or the store purchased from for any items damaged and/or
missing.
2. Designing Your PCI Adapter
The status LED indicators of PCI Card are described in the following.
Lnk/Act ON (Green): Indicates a valid connection.
Lnk/Act Flashing: Indicates the Adapter is transmitting or receiving data.
3. Installation
3.1 Install Your PCI Adapter
Open your PC case and locate an available PCI on the motherboard.
Slide PCI Adapter into the PCI slot. Make sure that all of its pins are touching the slot's contacts. You
may have to apply a bit of pressure to slide PCI Adapter all the way in. after it is firmly in place, secure
its fastening tab to your PC's chassis with a mounting screw. Then close your PC.
Attach the external antennas to PCI Adapter's antenna port.
Power on the PC.
Note: Select Cancel when “Found New Hardware” window appears.