User Manual

24
 802.1x Setting: This is introduced in the topic of “Section 3-2 : 802.1x Setting”
Figure 2-2-7 Advanced Configuration
 Power Save Mode: Choose CAM (Constantly Awake Mode) or Power Saving
Mode.
 Channel: Only available for setting under Ad-hoc mode. Users can choose the
channel frequency to start their Ad-Hoc network.
5.2.3 Pre-logon Connect
The Pre-logon Connect configuration page as shown in Figure 2-2-4.
Figure 2-2-4 Pre-logon Connect Page
Field definitions:
 Pre-logon Connect: Use ID and Password in Profile.
** Recommend: You need to restart the computer when using/non-using Pre-logon
connection.
5.3 Network
5.3.1 Network
The system will display the information of local APs from the last scan result as part
of the Network section. The Listed information includes the SSID, BSSID, Signal,
Channel, Encryption algorithm, Authentication and Network type as shown in Figure
2-3-1-1.