User's Manual

Appendix
-25-
0: FCC (Canada)
CH1 ~ CH11
1: ETSI
CH1 ~ CH13
2: SPAIN
CH10 ~ CH11
3: FRANCE
CH10 ~ CH13
4: MKK
CH14 ~ CH14
5: MKKI (TELEC)
CH1 ~ CH14
6: ISRAEL
CH3 ~ CH9
7: ISRAEL
CH5 ~ CH13
4.
Wireless Protection: Auto, on, and off. System default is auto.
a. Auto: STA will dynamically change as AP announcement.
b. On: Always send frame with protection.
c. Off: Always send frame without protection.
5.
Beacon (ms): The time between two beacons. System default is 100 ms.
6.
TX Power: Manually force the AP transmits power. System default is 100%.
7.
TX Rate: Manually force the Transmit using selected rate. Default is auto.
8.
Idle Time: Manually force the Idle Time using selected value. Default is 300.
9.
Channel: Manually force the AP using the channel. System default is channel 1.
10.
Use Mac Address: Use MAC address of used wireless card to be AP name.
System default is APX (X is last number of Mac Address).
11.
Security Setting: Authentication mode and encryption algorithm used within the
AP. System default is no authentication and encryption.
12.
No forwarding among wireless clients: No beacon among wireless client, clients
can share information each other. System default is no forwarding.
13.
Hide SSID: Prevent this AP from recognized in wireless network. This is disabled
as default.
14.
Allow BW40 MHz: Allow BW40 MHz capability.
15.
Default: Use system default value.
16.
Apply: Apply the above changes.