User's Manual

-70-
Describe "WPS Status Bar" - "PIN - xxx" as follow :
A successful PIN Configuration :
Start PIN connection - SSID ~> Begin associating to WPS AP ~> Associated to
WPS AP ~> Sending EAPOL-Start ~> Sending EAP-Rsp (ID) ~> Receive M1 ~>
Sending M2 ~> Receive M3 ~> Sending M4 ~> Receive M5 ~> Sending M6 ~>
Receive M7 ~> Sending M8 ~> Receive EAP Rsp (Done) ~> Sending EAP Rsp
(ACK) ~> Configured ~> WPS status is disconnected ~> WPS status is connected
successfully-SSID
Describe "WPS Status Bar" - "PBC - xxx" as follow :
A successful PBC Configuration :
Start PBC connection ~> Scanning AP ~> Begin associating to WPS AP ~>
Associated to WPS AP ~> Sending EAPOL-Start ~> Sending EAP-Rsp (ID) ~>
Receive M1 ~> Sending M2 ~> Receive M3 ~> Sending M4 ~> Receive M5 ~>
Sending M6 ~> Receive M7 ~> Sending M8 ~> Receive EAP Rsp (Done) ~>
Sending EAP Rsp (ACK) ~> Configured ~> WPS status is disconnected ~> WPS
status is connected successfully-SSID
4.2.8 About
4.2.8.1 About
Click "About" displays the wireless card and driver version information as shown in
Figure 2-8.