User's Manual

Utility Config
-69-
If the PIN configuration is setup, enter the PIN sent from the Enrollee.
Start PIN or PBC. The following procedures are as similar as section 2-7-3 (PIN
Enrollee Setup) or section 2-7-4(PBC Enrollee Setup),
If your AP Enrollee has been configured before the WPS process, the credential
you set in advance will be updated to the AP itself. Otherwise, after a successful
registration, the AP Enrollee will be re-configured with the new parameters, and the
STA Registrar will connect to the AP Enrollee with these new parameters.