User's Manual

Utility Config
-67-
~>...
Too Many PBC AP available :
Scanning AP ~> Too Many PBC AP available ~> Scanning AP ~> Too Many PBC
AP available ~>...
WPS configuration doesn't complete after two-minute connection:
WPS Eap process failed.
When Errors occur within two-minutes of establishing a connection, the WPS
status bar might report "WPS Eap process failed".
Error messages might be:
1. Receive EAP with wrong NONCE.
2. Receive EAP without integrity.
3. An inappropriate EAP-FAIL received.
Describe "Multiple PBC session overlaps" as follow :
Dual bands:
AP1 is a G-Band AP using PBC mode. (ID = 0x0004)
AP2 is a A-Band AP using PBC mode. (ID = 0x0004)
They have the same UUID-E.
STA would regard these two APs as a dual-radio AP and select one band to
connect.
Different UUID-E :
AP1 is a G-Band AP using PBC mode. (ID = 0x0004)
AP2 is a G-Band AP using PBC mode. (ID = 0x0004)
They have the different UUID-E.
STA would regard these two APs as two different APs and wait until only one PBC
AP is available.