User's Manual

-66-
Configure and receive one or more credential(s).
Then connect successfully. The result will be displayed as it is in the figure below.
Describe "WPS Status Bar" - "PBC - xxx" as follow :
A successful PBC Configuration :
Start PBC connection ~> Scanning AP ~> Begin associating to WPS AP ~>
Associated to WPS AP ~> Sending EAPOL-Start ~> Sending EAP-Rsp (ID) ~>
Receive EAP-Rsp (Start) ~> Sending M1 ~> Received M2 ~> Sending M3 ~>
Received M4 ~> Sending M5 ~> Received M6 ~> Sending M7 ~> Received M8 ~>
Sending EAP-Rsp (Done) ~> Configured ~> WPS status is disconnected ~> WPS
status is connected successfully-SSID
No PBC AP available :
Scanning AP ~> No PBC AP available ~> Scanning AP ~> No PBC AP available