User's Manual

-62-
You will look like the below figure.
If Credential#1 is reliable and present, the system will connect with Credential#1. If
not, the system will automatically rotate to the next existing credential.
The user can also click "Rotate" to rotate to the next credential usable credential.
Describe "WPS Status Bar" - "PIN - xxx" as follow:
Acceptable PIN Configurations:
Start PIN connection - SSID ~> Begin associating to WPS AP ~> Associated to
WPS AP ~> Sending EAPOL-Start ~> Sending EAP-Rsp (ID) ~> Receive EAP-Req
(Start) ~> Sending M1 ~> Received M2 ~> (Received M2D ~> Sending EAP-Rsp
(ACK)) ~> Sending M3 ~> Received M4 ~> Sending M5 ~> Received M6 ~>
Sending M7 ~> Received M8 ~> Sending EAP-Rsp(Done) ~> Configured ~> WPS
status is disconnected ~> WPS status is connected successfully-SSID
WPS configuration doesn't complete after a two-minute connection:
WPS EAP process failed.