User's Manual

-18-
Figure 1-13 Show connection status by using WZC to initiate the connection
4.2 RaUI
4.2.1 Start
4.2.1.1 Start RaUI
When starting RaUI, the system will connect to the AP with best signal strength
without setting a profile or matching a profile setting. When starting RaUI, it will issue
a scan command to a wireless NIC. After two seconds, the AP list will be updated
with the results of a BSS list scan. The AP list includes most used fields, such as
SSID, network type, channel used, wireless mode, security status and the signal
percentage. The arrow icon indicates the connected BSS or IBSS network. The
dialog box is shown in Figure 2-1.