User's Manual

5G Outdoor Router
User Manual
- 33 -
Item Description
Wireless On/Off
Click Wireless OFF button to turn off wireless RF radio.
Click Wireless ON button to turn on wireless RF radio.
Antenna Switch
Select Internal antenna or External antenna for using.
The default is using Internal antenna.
Wireless Mode Click to select wireless mode from pull down menu.
SSID It is the wireless network name. The SSID can be 32 bytes long.
User can use the default SSID or change it.
Broadcast Network
Name (SSID)
Enable or disable the SSID broadcast function.
AP Isolation Wireless network is similar to the virtual local area network. All of the Wireless
client devices can access each other completely.
When you enable this function, it will turn off connection between wireless
clients. Only allows connection between wireless client and this AP router.
MBSSID AP
Isolation
Enable this function will turn off connection between clients with different
MBSSID. Example: The client connected with BSSID 1. When enable this
function, it will not connect with BSSID 2. Only can access between clients with
SSID 1.
BSSID Show the MAC address of Wireless interface.
Frequency (Channel) Select the wireless communication frequency/channel from pull-down menu.
Operating Mode Select “Mixed Mode” for 11b/g/n mode or “Green Field” for 11n mode.
Channel BandWidth
Select the operating channel width 20 MHz or 20/40 MHz.
Guard Interval Select “Long” or “Auto”. Guard intervals are used to ensure that distinct
transmissions do not interfere with one another. Only effect under Mixed Mode.
MCS Select 0~7 or “Auto” from pull down menu. The default is “Auto”. Only effect
under Mixed Mode.