User's Manual
Table Of Contents
- 1. Terminology
- 2. Introduction
- 3. Installation
- 4. Software configuration
- 5. FREQUENTLY ASKED QUESTIONS (FAQ)
- 5.1 What and how to find my PC’s IP and MAC address?
- 5.2 What is Wireless LAN?
- 5.3 What are ISM bands?
- 5.4 How does wireless networking work?
- 5.5 What is BSSID?
- 5.6 What is ESSID?
- 5.7 What are potential factors that may causes interference?
- 5.8 What are the Open System and Shared Key authentications?
- 5.9 What is WEP?
- 5.10 What is Fragment Threshold?
- 5.11 What is RTS (Request to Send) Threshold?
- 5.12 What is Beacon Interval?
- 5.13 What is Preamble Type?
- 5.14 What is SSID Broadcast?
- 5.15 What is Wi-Fi Protected Access (WPA)?
- 5.16 What is WPA2?
- 5.17 What is 802.1x Authentication?
- 5.18 What is Temporal Key Integrity Protocol (TKIP)?
- 5.19 What is Advanced Encryption Standard (AES)?
- 5.20 What is Inter-Access Point Protocol (IAPP)?
- 5.21 What is Wireless Distribution System (WDS)?
- 5.22 What is Universal Plug and Play (uPNP)?
- 5.23 What is Maximum Transmission Unit (MTU) Size?
- 5.24 What is Clone MAC Address?
- 5.25 What is DDNS?
- 5.26 What is NTP Client?
- 5.27 What is VPN?
- 5.28 What is IPSEC?
- 5.29 What is WLAN Block Relay between Clients?
- 5.30 What is WMM?
- 5.31 What is WLAN ACK TIMEOUT?
- 5.32 What is Modulation Coding Scheme (MCS)?
- 5.33 What is Frame Aggregation?
- 5.34 What is Guard Intervals (GI)?
2.4G Outdoor Router
User Manual
Item Description
Port Forwarding
Select Enable or Disable the Port Forwarding function.
IP Address To forward data packets coming from WAN to a specific IP address that hosted
in local network behind the NAT firewall, fill in the IP address.
Port Range To forward data packets coming from WAN to a specific IP address that hosted
in local network behind the NAT firewall, fill in the port range.
Protocol Specify protocol, TCP&UDP, TCP or UDP.
Comment Make a comment for the port forwarding policy.
□
Make a mark for next action.
Delete Selected Click Delete Selected button to delete all that you selected.
Reset Click Reset button to clear selected items.
Item Description
Virtual Server
Select Enable or Disable the Virtual Server function.
IP Address To forward data packets coming from WAN to a specific IP address that hosted
in local network behind the NAT firewall, fill in the IP address.
Public Port To forward data packets coming from WAN to a specific IP address that hosted
in local network behind the NAT firewall, fill in the public port.
Private Port To forward data packets coming from WAN to a specific IP address that hosted
in local network behind the NAT firewall, fill in the private port.
- 44 -